Magnetic Locks are the strong and silent type.
When the power is on, not even the strength of Godzilla can get through.
When the power is off, the door opens for access, then silently locks back into place when the power activates once more. For after-hours security, you might need a keyed or digital lock for in case of power failure. Most Magnetic Locks fail-safe and will open when the power goes off. For the best service and advice for the Magnetic Lock, just contact our experienced team at Jim Roberts Locksmiths for the best service and advice!
Examples of Magnetic Locks…
Lockwood Padde Series Z4 Electromagnetic Lock – Monitored
- Padde Z4 single mini magnetic lock.
- 238 mm L x 48 mm H x 27 mm D.
- Holding force 250kg-280kg.
- Dual voltage 12 or 24Vdc field selectable.
- Current draw 450mA @ 12vdc & 225mA @24vdc.
- Suitable for single doors.
- Non monitored.
- Fire rated to 4 hours.
Lockwood Padde Series Z8 Electromagnetic Lock – Monitored
- Padde Z8/EML11 single magnetic lock.
- 266 mm L x 72 mm H x 40 mm D.
- Holding force 550kg-580kg.
- Dual voltage 12 or 24Vdc field selectable.
- Current draw 512mA @ 12vdc & 256mA @24vdc.
- Suitable for single doors.
- Monitored Hall-Effect/Bond sensing & Reed Switch .
- Fire rated to 4 hours.
FSH Maglock FEM5700
- Single magnetic lock.
- Dual voltage 12vdc @ 500mA, 24vdc @ 260mA.
- Non-monitored.
- MOV surge protection.
- Holding force up to 580kgs.
- 4 hour fire rating.
- Satin anodised aluminium housing.
- Zinc plated electromagnetic body.
- Magnet size 268 mm L x 73 mm H x 40 mm D.
- Armature plate 190 mm L x 61 mm H x 16 mm D.
- Guaranteed no residual magnetism.
- Monitored versions supplied with anti tamper plate.
FSH Maglock FEM3500
- Single magnetic lock.
- Dual voltage 12vdc @ 500mA, 24vdc @ 250mA.
- Non-monitored.
- MOV surge protection.
- Holding force up to 280kgs.
- 4-hour fire rating.
- Satin anodised aluminium housing.
- Zinc plated electromagnetic body.
- Magnet size 238 mm L x 48 mm H x 25 mm D.
- Armature plate 185 mm L x 38 mm H x 12 mm D.
- Guaranteed no residual magnetism.
- Monitored versions supplied with anti-tamper plate.
Working with the Best…
REQUEST A QUOTE OR INFORMATION
Electronic Access Control Services
All Electronic Access Control Systems need support and regular maintenance for optimal efficiency. For instance, there may be software upgrades, battery changes, new fobs required, or training required for new staff. Don’t stress! Jim Roberts Locksmiths provide a variety of services to suit the unique needs of both your business and your access control system.
Our team at Jim Roberts Locksmiths can:
- supply and install single and multiple door access control systems including push to exit buttons and emergency lock-down buttons.
- supply and install external pin pad, swipe card/ FOB access systems custom to the needs of your business or facility.
- repair, service, and maintain your access control system. We can also upgrade different systems to the latest hardware/ software for the relevant system.
- supply and install hard-wired access control systems and maintain the communication to your network.
- supply and install Wireless Access Control systems installing the required WAP system and commissioning to your network.
- provide you and your staff with onsite training and tech support as needed.
- can provide maintenance agreements for the upkeep of the batteries and general hardware maintenance annually/ monthly.
Residential Keyless Lock Services
For our residential clients, Jim Roberts Locksmiths supply & install keyless digital locks. We also help with any combination changes and fresh batteries as required.
